Форум Slackware Linux

# rm -rf /usr/doc/* /usr/man/*

[ ~/bluefish-2.2.10 ]# ./configure --help
`configure' configures bluefish 2.2.10 to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print `checking ...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for `--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or `..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [/usr/local]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]

By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc.  You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:                                                                                                                                   
  --bindir=DIR            user executables [EPREFIX/bin]                                                                                                                       
  --sbindir=DIR           system admin executables [EPREFIX/sbin]                                                                                                             
  --libexecdir=DIR        program executables [EPREFIX/libexec]                                                                                                               
  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]                                                                                                           
  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]                                                                                               
  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]                                                                                                         
  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]                                                                                                     
  --libdir=DIR            object code libraries [EPREFIX/lib]                                                                                                                 
  --includedir=DIR        C header files [PREFIX/include]                                                                                                                     
  --oldincludedir=DIR     C header files for non-gcc [/usr/include]                                                                                                           
  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]                                                                                                 
  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]                                                                                               
  --infodir=DIR           info documentation [DATAROOTDIR/info]                                                                                                               
  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]                                                                                                           
  --mandir=DIR            man documentation [DATAROOTDIR/man]                                                                                                                 
  --docdir=DIR            documentation root [DATAROOTDIR/doc/bluefish]
  --htmldir=DIR           html documentation [DOCDIR]
  --dvidir=DIR            dvi documentation [DOCDIR]
  --pdfdir=DIR            pdf documentation [DOCDIR]
  --psdir=DIR             ps documentation [DOCDIR]

Program names:
  --program-prefix=PREFIX            prepend PREFIX to installed program names
  --program-suffix=SUFFIX            append SUFFIX to installed program names
  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]

Optional Features:
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --enable-silent-rules   less verbose build output (undo: "make V=1")
  --disable-silent-rules  verbose build output (undo: "make V=0")
  --enable-maintainer-mode
                          enable make rules and dependencies not useful (and
                          sometimes confusing) to the casual installer
  --enable-dependency-tracking
                          do not reject slow dependency extractors
  --disable-dependency-tracking
                          speeds up one-time build
  --disable-nls           do not use Native Language Support
  --enable-static[=PKGS]  build static libraries [default=no]
  --enable-shared[=PKGS]  build shared libraries [default=yes]
  --enable-fast-install[=PKGS]
                          optimize for fast installation [default=yes]
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --enable-debugging-output
                          enable massive debugging output (slows down the
                          program) [default=no]
  --enable-highlight-profiling
                          enable profiling information about highlighting
                          patterns (slows down the program) [default=no]
  --enable-development    enable development checks, recommended when building
                          from svn [default=no]
  --enable-gprof-profiling
                          enable gprof profiling (slows down the program)
                          [default=no]
  --enable-gcov-coverage  enable coverage (slows down the program)
                          [default=no]
  --disable-deprecated    enable/disable deprecated functions (e.g. Glib/Gtk)
                          [default=yes]
  --enable-xml-catalog-update
                          enable (or disable) the running of xmlcatalog after
                          installation - some distributions like Debian use
                          their own system for registering catalogs, so be
                          careful here and also check the '--with-xml-catalog'
                          option [default=yes]
  --enable-update-databases
                          enable (or disable) the running of
                          update-desktop-database/update-mime-database after
                          installation [default=yes]

  --enable-spell-check    enable (or disable) spell checking capabilities
                          [default=yes]

  --disable-python        disable (or enable) python integration for
                          zen-coding plugin [default=yes]

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
                          both]
  --with-aix-soname=aix|svr4|both
                          shared library versioning (aka "SONAME") variant to
                          provide on AIX, [default=aix].
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
  --with-sysroot[=DIR]    Search for dependent libraries within DIR (or the
                          compiler's sysroot if not specified).
  --with-xml-catalog=[FILE]
                          the specified file is the systems XML catalog
                          (/etc/xml/catalog for most systems), that shall be
                          updated after installation running xmlcatalog
                          [default=${sysconfdir}/xml/catalog]
  --with-freedesktop_org-menu=[DIR]
                          install freedesktop.org menu files in directory DIR
                          (if supplied) or suppress installation
                          [default=${datadir}/applications]
  --with-freedesktop_org-mime=[DIR]
                          install freedesktop.org mime support files in
                          directory DIR (if supplied) or suppress installation
                          [default=${datadir}/mime]
  --with-freedesktop_org-appdata=[DIR]
                          install freedesktop.org appdata support files in
                          directory DIR (if supplied) or suppress installation
                          [default=${datadir}/appdata]
  --with-theme-path=[DIR] install theme icons in directory DIR (if supplied)
                          or suppress installation
                          [default=${datadir}/icons/hicolor]
  --with-icon-path=[DIR]  install GNOME-pixmap icons in directory DIR (if
                          supplied) or suppress installation
                          [default=${datadir}/pixmaps]
  --with-gtk2             Use GTK2+ instead of GTK3+, even if GTK3+ is
                          available [default=no]


Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  LIBS        libraries to pass to the linker, e.g. -l<library>
  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
              you have headers in a nonstandard directory <include dir>
  CPP         C preprocessor
  LT_SYS_LIBRARY_PATH
              User-defined run-time library search path.
  GDK_PIXBUF_CSOURCE
              The 'gdk-pixbuf-csource' executable. Use it to define or
              override its location.
  UPDATE_DESKTOP_DATABASE
              The 'update-desktop-database' program. Use it to define or
              override its location.
  UPDATE_MIME_DATABASE
              The 'update-mime-database' program. Use it to define or override
              its location.
  PKG_CONFIG  path to pkg-config utility
  PKG_CONFIG_PATH
              directories to add to pkg-config's search path
  PKG_CONFIG_LIBDIR
              path overriding pkg-config's built-in search path
  BLUEFISH_REQUIRED_CFLAGS
              C compiler flags for BLUEFISH_REQUIRED, overriding pkg-config
  BLUEFISH_REQUIRED_LIBS
              linker flags for BLUEFISH_REQUIRED, overriding pkg-config
  BLUEFISH_GTKMAC_CFLAGS
              C compiler flags for BLUEFISH_GTKMAC, overriding pkg-config
  BLUEFISH_GTKMAC_LIBS
              linker flags for BLUEFISH_GTKMAC, overriding pkg-config
  CHARMAP_PLUGIN_CFLAGS
              C compiler flags for CHARMAP_PLUGIN, overriding pkg-config
  CHARMAP_PLUGIN_LIBS
              linker flags for CHARMAP_PLUGIN, overriding pkg-config
  PYTHON      The 'python' binary with path. Use it to define or override the
              location of 'python'.
  MAN         The 'man' binary with path. Use it to define or override the
              location of 'man'.
  JING        The 'jing' binary with path. Use it to define or override the
              location of 'jing'.
  JING_FLAGS  Options, which should be used along with 'jing'.
  XMLLINT     The 'xmllint' binary with path. Use it to define or override the
              location of 'xmllint'.
  XMLLINT_FLAGS
              Options, which should be used along with 'xmllint', like e.g.
              '--nonet'.
  DESKTOP_FILE_VALIDATE
              The 'desktop-file-validate' binary with path. Use it to define
              or override the location of 'man'.

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

Report bugs to <http://bugzilla.gnome.org/buglist.cgi?product=bluefish>.

[ ~/bluefish-2.2.10 ]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
... бла-бла-бла
....
configure: checking for required development files
checking for BLUEFISH_REQUIRED... no
configure: error: Package requirements (gtk+-3.0 gdk-3.0 glib-2.0 >= 2.24 gmodule-2.0 >= 2.24 gobject-2.0 pango gdk-pixbuf-2.0 gio-unix-2.0 >= 2.24 gthread-2.0 libxml-2.0) were not met:

No package 'gtk+-3.0' found
No package 'gdk-3.0' found
No package 'glib-2.0' found
No package 'gmodule-2.0' found
No package 'gobject-2.0' found
No package 'pango' found
No package 'gdk-pixbuf-2.0' found
No package 'gio-unix-2.0' found
No package 'gthread-2.0' found
No package 'libxml-2.0' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables BLUEFISH_REQUIRED_CFLAGS
and BLUEFISH_REQUIRED_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

gmodule-2.0:rpm search

 [ ~/bluefish-2.2.10 ]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
....
бла-бла-бла.
...
checking that generated files are newer than configure... done
configure: creating ./config.status
..........
....