Форум Slackware Linux

KERNEL=="sr[0-9], MODE=="0000777", GROUP=="plugdev", RUN+="/bin/mkdir -p /media/%E{dir_name}, RUN+=/bin/mount -t auto -o rw,relatime,noexec,nodev,utf8 /dev/%k /media/%E{dir_name}"
KERNEL=="sr[0-9], MODE=="0777", GROUP=="plugdev", RUN+="/bin/umount -l /media/%E{dir_name}", RUN+="/bin/rmdir /media/%E{dir_name}"

eject: unable to eject, last error: Неприменимый к данному устройству ioctl

# ls /etc/udev/rules.d/90-cdrom.rules
/bin/ls: cannot access '/etc/udev/rules.d/90-cdrom.rule': No such file or directory

# slackpkg file-search 90-cdrom.rule
...
No packages contains "90-cdrom\.rules" file.

grep /cdrom /etc/fstab

$ eject
umount: /run/media/me/CD: umount failed: Operation not permitted
eject: unmount of `/run/media/me/CD' failed

eject -v

$ eject -v
eject: using default device `cdrom'
eject: device name is `cdrom'
eject: expanded name is `/dev/cdrom'
eject: `/dev/cdrom' is a link to `/dev/sr0'
eject: `/dev/sr0' is not mounted
eject: `/dev/sr0' is not a mount point
eject: `/dev/sr0' is not a multipartition device
eject: trying to eject `/dev/sr0' using CD-ROM eject command
eject: CD-ROM eject command failed
eject: trying to eject `/dev/sr0' using SCSI commands
eject: SCSI eject failed
eject: trying to eject `/dev/sr0' using floppy eject command
eject: floppy eject command failed
eject: trying to eject `/dev/sr0' using tape offline command
eject: tape offline command failed
eject: unable to eject, last error: Неприменимый к данному устройству ioctl

$ cdrecord -dev /dev/sr0 -toc
Cdrecord-ProDVD-ProBD-Clone 3.01 (i686-pc-linux-gnu) Copyright (C) 1995-2015 Joerg Schilling
cdrecord: Insufficient 'file read' privileges. You will not be able to open all needed devices.
cdrecord: Insufficient 'file write' privileges. You will not be able to open all needed devices.
cdrecord: Insufficient 'device' privileges. You may not be able to send all needed SCSI commands, this my cause various unexplainable problems.
cdrecord: Insufficient 'memlock' privileges. You may get buffer underruns.
cdrecord: Insufficient 'priocntl' privileges. You may get buffer underruns.
cdrecord: Insufficient 'network' privileges. You will not be able to do remote SCSI.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'ATAPI   '
Identifikation : 'iHAS124   F     '
Revision       : 'CLDM'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: PACKET SAO LAYER_JUMP
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
cdrecord: Операция не позволена. rezero unit: scsi sendcmd: fatal error
CDB:  01 00 00 00 00 00
cdrecord: Операция не позволена. Cannot send SCSI cmd via ioctl.
cdrecord: Операция не позволена. Cannot open or use SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.