Форум Slackware Linux

### UPDATE 2017.04.08 ###

добавлена сборка: пакеты и VirtualBox имидж
TDE 14.0.4 for Slackware 14.2 x32

я про "косяки раскладки в КДЕ3 и ТДЕ" - только читал в инете, просил "сообщество" описать пошагово процедуру добавления раскладки и идентификацию "глюка", так ни чего и не дождался, кроме того, что дали ссылку на "кажется вот этот косяк", но в данной статье автор вместо стандартного подхода использовал "сторонний софт", дальше разбираться со статьей не стал :о)

изучаем
/etc/syslog.conf

# /etc/syslog.conf
# For info about the format of this file, see "man syslog.conf"
# and /usr/doc/sysklogd/README.linux. Note the '-' prefixing some
# of these entries; this omits syncing the file after every logging.
# In the event of a crash, some log information might be lost, so
# if this is a concern to you then you might want to remove the '-'.
# Be advised this will cause a performation loss if you're using
# programs that do heavy logging.

# Uncomment this to see kernel messages on the console.
#kern.* /dev/console

# Log anything 'info' or higher, but lower than 'warn'.
# Exclude authpriv, cron, mail, and news. These are logged elsewhere.
*.info;*.!warn;\
authpriv.none;cron.none;mail.none;news.none -/var/log/messages

# Log anything 'warn' or higher.
# Exclude authpriv, cron, mail, and news. These are logged elsewhere.
*.warn;\
authpriv.none;cron.none;mail.none;news.none -/var/log/syslog

# Debugging information is logged here.
*.=debug -/var/log/debug

# Private authentication message logging:
authpriv.* -/var/log/secure

# Cron related logs:
cron.* -/var/log/cron

# Mail related logs:
mail.* -/var/log/maillog

# Emergency level messages go to all users:
*.emerg *

# This log is for news and uucp errors:
uucp,news.crit -/var/log/spooler

# Uncomment these if you'd like INN to keep logs on everything.
# You won't need this if you don't run INN (the InterNetNews daemon).
#news.=crit -/var/log/news/news.crit
#news.=err -/var/log/news/news.err
#news.notice

/var/log/*

[ 33%] Building CXX object twin/CMakeFiles/tdeinit_twin-shared.dir/client.cpp.o
In file included from /tmp/build/tmp-tdebase/tdebase/twin/lib/kdecoration_p.h:32:0,
from /tmp/build/tmp-tdebase/tdebase/twin/options.h:19,
from /tmp/build/tmp-tdebase/tdebase/twin/client.h:28,
from /tmp/build/tmp-tdebase/tdebase/twin/client.cpp:12:
/tmp/build/tmp-tdebase/tdebase/twin/lib/kdecoration.h:630:2: warning: #warning Redo all the XYZChange() virtuals as signals. [-Wcpp]
#warning Redo all the XYZChange() virtuals as signals.
^~~~~~~
/tmp/build/tmp-tdebase/tdebase/twin/lib/kdecoration.h:772:2: warning: #warning Update the docs. [-Wcpp]
#warning Update the docs.
^~~~~~~
/tmp/build/tmp-tdebase/tdebase/twin/client.cpp: In member function ‘bool KWinInternal::Client::isModalSystemNotification() const’:
/tmp/build/tmp-tdebase/tdebase/twin/client.cpp:512:38: error: ISO C++ forbids comparison between pointer and integer [-fpermissive]
if (result == Success && data != None && format == 32 )
^~~~
/tmp/build/tmp-tdebase/tdebase/twin/client.cpp: In member function ‘bool KWinInternal::Client::getWindowOpacity()’:
/tmp/build/tmp-tdebase/tdebase/twin/client.cpp:2978:38: error: ISO C++ forbids comparison between pointer and integer [-fpermissive]
if (result == Success && data != None && format == 32 )
^~~~
make[2]: *** [twin/CMakeFiles/tdeinit_twin-shared.dir/build.make:129: twin/CMakeFiles/tdeinit_twin-shared.dir/client.cpp.o] Error 1
make[1]: *** [CMakeFiles/Makefile2:15646: twin/CMakeFiles/tdeinit_twin-shared.dir/all] Error 2
make: *** [Makefile:130: all] Error 2

почему на current-ветке не собирается пакет tdebase?

ISO C++ запрещает сравнение указателя и целого [-fpermissive]

-fpermissive
Downgrade some diagnostics about nonconformant code from errors to warnings. Thus, using -fpermissive will allow some nonconforming code to compile.

Понижает некоторые диагностики о несоответствующем коде от ошибки до предупреждения. То есть, использование -fpermissive позволит компилировать некоторый не совсем корректный код.

Generic Values and Types
The following symbols are defined by Xlib and used throughout the manual:
- None is the universal null resource ID or atom.

XGetWindowProperty() always allocates one extra byte in prop_return (even if the property is zero length) and sets it to zero so that simple properties consisting of characters do not have to be copied into yet another string before use.

The function returns Success if it executes successfully. To free the resulting data, use XFree().