slackware.ru
http://www.slackware.ru/forum/

непонятный глюк после устанвки драйверов ati
http://www.slackware.ru/forum/viewtopic.php?f=14&t=641
Страница 1 из 1

Автор:  0zxc [ 20 июл 2011 12:04 ]
Заголовок сообщения:  непонятный глюк после устанвки драйверов ati

после устанвки драйвера v11.6 64_86 на ATI Radeon HD 3200 при выходе из скринсейвера оконо разблокировки (ввода пароля) невидно. хотя если пароль ввести "наугад" разблокировка происходит. тоже самое при ручной блокировке экрана.
Плюс ко всему при выходе из иксов консоль оказывается в очень маленьком разрешении и строку ввода не видно. остается только "наугад" вводить reboot или опять startx. пробовал более ранние верси драйвера - не помогает. подскажите в чем может быть дело?

Автор:  Makap [ 20 июл 2011 21:06 ]
Заголовок сообщения:  Re: непонятный глюк после устанвки драйверов ati

Взглянуть бы на /var/log/Xorg.0.log

Автор:  0zxc [ 21 июл 2011 07:25 ]
Заголовок сообщения:  Re: непонятный глюк после устанвки драйверов ati

Код:
[    46.912]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[    46.927] X Protocol Version 11, Revision 0
[    46.932] Build Operating System: Slackware 13.37 Slackware Linux Project
[    46.937] Current Operating System: Linux darkstar 2.6.37.6 #3 SMP Sat Apr 9 22:49:32 CDT 2011 x86_64
[    46.944] Kernel command line: BOOT_IMAGE=Slackware_13.37 ro root=803 vt.default_utf8=0
[    46.949] Build Date: 17 March 2011  10:50:17PM
[    46.954] 
[    46.959] Current version of pixman: 0.20.2
[    46.965]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    46.975] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    46.992] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 15:08:03 2011
[    47.048] (==) Using config file: "/etc/X11/xorg.conf"
[    47.055] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    47.092] (==) ServerLayout "aticonfig Layout"
[    47.093] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    47.093] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    47.093] (**) |   |-->Device "aticonfig-Device[0]-0"
[    47.094] (**) Option "Xinerama" "on"
[    47.094] (==) Automatically adding devices
[    47.094] (==) Automatically enabling devices
[    47.107] (**) Xinerama: enabled
[    47.107] (WW) The directory "/usr/share/fonts/local" does not exist.
[    47.107]    Entry deleted from font path.
[    47.107] (WW) The directory "/usr/share/fonts/CID" does not exist.
[    47.107]    Entry deleted from font path.
[    47.188] (==) FontPath set to:
   /usr/share/fonts/TTF,
   /usr/share/fonts/OTF,
   /usr/share/fonts/Type1,
   /usr/share/fonts/misc,
   /usr/share/fonts/75dpi/:unscaled,
   /usr/share/fonts/100dpi/:unscaled,
   /usr/share/fonts/75dpi,
   /usr/share/fonts/100dpi,
   /usr/share/fonts/cyrillic
[    47.188] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    47.188] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    47.188] (II) Loader magic: 0x7d2500
[    47.188] (II) Module ABI versions:
[    47.188]    X.Org ANSI C Emulation: 0.4
[    47.188]    X.Org Video Driver: 8.0
[    47.188]    X.Org XInput driver : 11.0
[    47.188]    X.Org Server Extension : 4.0
[    47.193] (--) PCI:*(0:1:5:0) 1002:9612:103c:30f1 rev 0, Mem @ 0xc0000000/268435456, 0xd2300000/65536, 0xd2200000/1048576, I/O @ 0x00005000/256
[    47.193] (II) Open ACPI successful (/var/run/acpid.socket)
[    47.193] (II) "extmod" will be loaded by default.
[    47.193] (II) "dbe" will be loaded by default.
[    47.193] (II) "glx" will be loaded by default.
[    47.193] (II) "record" will be loaded by default.
[    47.193] (II) "dri" will be loaded by default.
[    47.193] (II) "dri2" will be loaded by default.
[    47.193] (II) LoadModule: "extmod"
[    47.243] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    47.263] (II) Module extmod: vendor="X.Org Foundation"
[    47.263]    compiled for 1.9.5, module version = 1.0.0
[    47.263]    Module class: X.Org Server Extension
[    47.263]    ABI class: X.Org Server Extension, version 4.0
[    47.263] (II) Loading extension MIT-SCREEN-SAVER
[    47.263] (II) Loading extension XFree86-VidModeExtension
[    47.263] (II) Loading extension XFree86-DGA
[    47.263] (II) Loading extension DPMS
[    47.263] (II) Loading extension XVideo
[    47.263] (II) Loading extension XVideo-MotionCompensation
[    47.263] (II) Loading extension X-Resource
[    47.263] (II) LoadModule: "dbe"
[    47.264] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    47.265] (II) Module dbe: vendor="X.Org Foundation"
[    47.265]    compiled for 1.9.5, module version = 1.0.0
[    47.265]    Module class: X.Org Server Extension
[    47.265]    ABI class: X.Org Server Extension, version 4.0
[    47.265] (II) Loading extension DOUBLE-BUFFER
[    47.265] (II) LoadModule: "glx"
[    47.266] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    47.297] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[    47.298]    compiled for 7.6.0, module version = 1.0.0
[    47.299] (II) Loading extension GLX
[    47.299] (II) LoadModule: "record"
[    47.300] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    47.310] (II) Module record: vendor="X.Org Foundation"
[    47.310]    compiled for 1.9.5, module version = 1.13.0
[    47.310]    Module class: X.Org Server Extension
[    47.310]    ABI class: X.Org Server Extension, version 4.0
[    47.310] (II) Loading extension RECORD
[    47.310] (II) LoadModule: "dri"
[    47.311] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    47.328] (II) Module dri: vendor="X.Org Foundation"
[    47.328]    compiled for 1.9.5, module version = 1.0.0
[    47.328]    ABI class: X.Org Server Extension, version 4.0
[    47.328] (II) Loading extension XFree86-DRI
[    47.328] (II) LoadModule: "dri2"
[    47.329] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    47.342] (II) Module dri2: vendor="X.Org Foundation"
[    47.342]    compiled for 1.9.5, module version = 1.2.0
[    47.342]    ABI class: X.Org Server Extension, version 4.0
[    47.342] (II) Loading extension DRI2
[    47.342] (II) LoadModule: "fglrx"
[    47.346] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[    47.676] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    47.687]    compiled for 1.4.99.906, module version = 8.81.5
[    47.687]    Module class: X.Org Video Driver
[    47.691] (II) Loading sub module "fglrxdrm"
[    47.691] (II) LoadModule: "fglrxdrm"
[    47.691] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    47.736] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    47.736]    compiled for 1.4.99.906, module version = 8.81.5
[    47.736] (II) ATI Proprietary Linux Driver Version Identifier:8.81.5
[    47.736] (II) ATI Proprietary Linux Driver Release Identifier: 8.812                               
[    47.736] (II) ATI Proprietary Linux Driver Build Date: Jan  4 2011 21:31:36
[    47.736] (--) using VT number 7

[    47.761] (WW) Falling back to old probe method for fglrx
[    47.854] (II) Loading PCS database from /etc/ati/amdpcsdb
[    47.857] (--) Chipset Supported AMD Graphics Processor (0x9612) found
[    47.859] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[    47.859] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[    47.859] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[    47.859] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[    47.859] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[    47.859] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[    47.859] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[    47.860] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[    47.860] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[    47.860] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[    47.860] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[    47.860] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[    47.860] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[    47.861] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    47.875] (II) AMD Video driver is signed
[    47.876] (II) fglrx(0): pEnt->device->identifier=0x7faed0
[    47.876] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[    47.878] (II) Loading sub module "vgahw"
[    47.878] (II) LoadModule: "vgahw"
[    47.879] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[    47.897] (II) Module vgahw: vendor="X.Org Foundation"
[    47.897]    compiled for 1.9.5, module version = 0.1.0
[    47.897]    ABI class: X.Org Video Driver, version 8.0
[    47.897] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    47.897] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    47.897] (==) fglrx(0): Default visual is TrueColor
[    47.897] (**) fglrx(0): Option "DPMS" "true"
[    47.898] (==) fglrx(0): RGB weight 888
[    47.898] (II) fglrx(0): Using 8 bits per RGB
[    47.898] (==) fglrx(0): Buffer Tiling is ON
[    47.918] (II) Loading sub module "fglrxdrm"
[    47.918] (II) LoadModule: "fglrxdrm"
[    47.918] (II) Reloading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    47.928] ukiDynamicMajor: found major device number 243
[    47.928] ukiDynamicMajor: found major device number 243
[    47.928] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[    47.928] ukiOpenDevice: node name is /dev/ati/card0
[    47.929] ukiOpenDevice: open result is 13, (OK)
[    47.929] ukiOpenByBusid: ukiOpenMinor returns 13
[    47.929] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[    47.930] (==) fglrx(0): NoAccel = NO
[    47.930] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[    47.930] (--) fglrx(0): Chipset: "ATI Radeon HD 3200 Graphics " (Chipset = 0x9612)
[    47.930] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30f1)
[    47.930] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    47.930] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    47.930] (--) fglrx(0): MMIO registers at 0xd2300000
[    47.930] (--) fglrx(0): I/O port at 0x00005000
[    47.930] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    47.942] (II) fglrx(0): AC Adapter is used
[    47.969] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    48.037] (II) Loading sub module "vbe"
[    48.037] (II) LoadModule: "vbe"
[    48.054] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[    48.063] (II) Module vbe: vendor="X.Org Foundation"
[    48.063]    compiled for 1.9.5, module version = 1.1.0
[    48.063]    ABI class: X.Org Video Driver, version 8.0
[    48.064] (II) fglrx(0): VESA BIOS detected
[    48.064] (II) fglrx(0): VESA VBE Version 3.0
[    48.064] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    48.064] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    48.065] (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
[    48.065] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[    48.065] (II) fglrx(0): VESA VBE OEM Product: RS780M
[    48.065] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    48.086] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    48.086] (II) fglrx(0): UMA/SP interleave mode is enabled in the BIOS
[    48.086] (--) fglrx(0): Video RAM: 327680 kByte, Type: DDR2
[    48.086] (II) fglrx(0): PCIE card detected
[    48.086] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    48.086] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    48.091] (II) fglrx(0): Using adapter: 1:5.0.
[    48.106] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x14000000)
[    48.172] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[    48.172] (II) fglrx(0): RandR 1.2 support is enabled!
[    48.172] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    48.172] (==) fglrx(0): Center Mode is disabled
[    48.172] (II) Loading sub module "fb"
[    48.172] (II) LoadModule: "fb"
[    48.172] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    48.179] (II) Module fb: vendor="X.Org Foundation"
[    48.179]    compiled for 1.9.5, module version = 1.0.0
[    48.179]    ABI class: X.Org ANSI C Emulation, version 0.4
[    48.180] (II) Loading sub module "ddc"
[    48.180] (II) LoadModule: "ddc"
[    48.180] (II) Module "ddc" already built-in
[    48.683] (II) fglrx(0): Finished Initialize PPLIB!
[    48.708] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    48.708] (II) fglrx(0): Output CRT1 has no monitor section
[    48.708] (II) fglrx(0): Output TV has no monitor section
[    48.709] (II) fglrx(0): Output CV has no monitor section
[    48.730] (II) Loading sub module "ddc"
[    48.730] (II) LoadModule: "ddc"
[    48.730] (II) Module "ddc" already built-in
[    48.730] (II) fglrx(0): Connected Display0: LVDS
[    48.730] (II) fglrx(0): Display0 EDID data ---------------------------
[    48.730] (II) fglrx(0): Manufacturer: SEC  Model: 4841  Serial#: 0
[    48.731] (II) fglrx(0): Year: 2007  Week: 0
[    48.731] (II) fglrx(0): EDID Version: 1.3
[    48.731] (II) fglrx(0): Digital Display Input
[    48.731] (II) fglrx(0): Max Image Size [cm]: horiz.: 26  vert.: 16
[    48.731] (II) fglrx(0): Gamma: 2.20
[    48.731] (II) fglrx(0): No DPMS capabilities specified
[    48.731] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    48.731] (II) fglrx(0): First detailed timing is preferred mode
[    48.731] (II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    48.731] (II) fglrx(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    48.731] (II) fglrx(0): Manufacturer's mask: 0
[    48.731] (II) fglrx(0): Supported detailed timing:
[    48.731] (II) fglrx(0): clock: 69.3 MHz   Image Size:  261 x 163 mm
[    48.731] (II) fglrx(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1415 h_border: 0
[    48.731] (II) fglrx(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 816 v_border: 0
[    48.732] (II) fglrx(0): Unknown vendor-specific block f
[    48.732] (II) fglrx(0):  SAMSUNG
[    48.732] (II) fglrx(0):  121AT02-001
[    48.732] (II) fglrx(0): EDID (in hex):
[    48.732] (II) fglrx(0):    00ffffffffffff004ca3414800000000
[    48.732] (II) fglrx(0):    00110103801a10780a87f594574f8c27
[    48.732] (II) fglrx(0):    27505400000001010101010101010101
[    48.732] (II) fglrx(0):    010101010101121b0087502010301030
[    48.732] (II) fglrx(0):    130005a3100000190000000f00000000
[    48.732] (II) fglrx(0):    00000000002387026400000000fe0053
[    48.732] (II) fglrx(0):    414d53554e470a2020202020000000fe
[    48.732] (II) fglrx(0):    00313231415430322d3030310a20002b
[    48.732] (II) fglrx(0): End of Display0 EDID data --------------------
[    48.889] (II) fglrx(0): EDID for output LVDS
[    48.889] (II) fglrx(0): Manufacturer: SEC  Model: 4841  Serial#: 0
[    48.889] (II) fglrx(0): Year: 2007  Week: 0
[    48.889] (II) fglrx(0): EDID Version: 1.3
[    48.889] (II) fglrx(0): Digital Display Input
[    48.889] (II) fglrx(0): Max Image Size [cm]: horiz.: 26  vert.: 16
[    48.889] (II) fglrx(0): Gamma: 2.20
[    48.889] (II) fglrx(0): No DPMS capabilities specified
[    48.889] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    48.889] (II) fglrx(0): First detailed timing is preferred mode
[    48.889] (II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    48.889] (II) fglrx(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    48.889] (II) fglrx(0): Manufacturer's mask: 0
[    48.889] (II) fglrx(0): Supported detailed timing:
[    48.889] (II) fglrx(0): clock: 69.3 MHz   Image Size:  261 x 163 mm
[    48.889] (II) fglrx(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1415 h_border: 0
[    48.889] (II) fglrx(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 816 v_border: 0
[    48.889] (II) fglrx(0): Unknown vendor-specific block f
[    48.889] (II) fglrx(0):  SAMSUNG
[    48.889] (II) fglrx(0):  121AT02-001
[    48.890] (II) fglrx(0): EDID (in hex):
[    48.890] (II) fglrx(0):    00000000000000003a20466972737420
[    48.890] (II) fglrx(0):    64657461696c65642074696d696e6720
[    48.890] (II) fglrx(0):    697320707265666572726564206d6f64
[    48.890] (II) fglrx(0):    650a000a0001121b0087502010301030
[    48.890] (II) fglrx(0):    130005a310000019c100000000000000
[    48.890] (II) fglrx(0):    f8b1af51037f0000f8b1af51037f0000
[    48.890] (II) fglrx(0):    414d53554e470a2020202020000000fe
[    48.890] (II) fglrx(0):    00313231415430322d3030310a20002b
[    48.890] (II) fglrx(0): EDID vendor "SEC", prod id 18497
[    48.890] (II) fglrx(0): Printing DDC gathered Modelines:
[    48.890] (II) fglrx(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1415  800 801 804 816 -hsync -vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Printing probed modes for output LVDS
[    48.890] (II) fglrx(0): Modeline "1280x800"x60.0   69.30  1280 1296 1344 1415  800 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Modeline "1280x768"x60.0   69.30  1280 1296 1344 1415  768 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Modeline "1280x720"x60.0   69.30  1280 1296 1344 1415  720 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Modeline "1024x768"x60.0   69.30  1024 1296 1344 1415  768 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Modeline "1280x600"x60.0   69.30  1280 1296 1344 1415  600 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Modeline "1024x600"x60.0   69.30  1024 1296 1344 1415  600 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Modeline "800x600"x60.0   69.30  800 1296 1344 1415  600 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Modeline "800x480"x60.0   69.30  800 1296 1344 1415  480 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Modeline "720x480"x60.0   69.30  720 1296 1344 1415  480 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): Modeline "640x480"x60.0   69.30  640 1296 1344 1415  480 801 804 816 +hsync +vsync (49.0 kHz)
[    48.890] (II) fglrx(0): EDID for output CRT1
[    48.890] (II) fglrx(0): EDID for output TV
[    48.890] (II) fglrx(0): EDID for output CV
[    48.890] (II) fglrx(0): Output LVDS connected
[    48.890] (II) fglrx(0): Output CRT1 disconnected
[    48.890] (II) fglrx(0): Output TV disconnected
[    48.890] (II) fglrx(0): Output CV disconnected
[    48.890] (II) fglrx(0): Using exact sizes for initial modes
[    48.890] (II) fglrx(0): Output LVDS using initial mode 1280x800
[    48.890] (II) fglrx(0): Display dimensions: (260, 160) mm
[    48.890] (II) fglrx(0): DPI set to (125, 127)
[    48.890] (II) fglrx(0): Adapter ATI Radeon HD 3200 Graphics  has 2 configurable heads and 1 displays connected.
[    48.890] (==) fglrx(0):  PseudoColor visuals disabled
[    48.890] (II) Loading sub module "ramdac"
[    48.890] (II) LoadModule: "ramdac"
[    48.890] (II) Module "ramdac" already built-in
[    48.890] (==) fglrx(0): NoDRI = NO
[    48.890] (==) fglrx(0): Capabilities: 0x00000000
[    48.891] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    48.891] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    48.891] (==) fglrx(0): UseFastTLS=0
[    48.891] (==) fglrx(0): BlockSignalsOnLock=1
[    48.891] (--) Depth 24 pixmap format is 32 bpp
[    48.892] (II) Loading extension ATIFGLRXDRI
[    48.892] (II) fglrx(0): doing swlDriScreenInit
[    48.892] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    48.892] ukiDynamicMajor: found major device number 243
[    48.892] ukiDynamicMajor: found major device number 243
[    48.892] ukiDynamicMajor: found major device number 243
[    48.892] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[    48.892] ukiOpenDevice: node name is /dev/ati/card0
[    48.892] ukiOpenDevice: open result is 18, (OK)
[    48.892] ukiOpenByBusid: ukiOpenMinor returns 18
[    48.892] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[    48.892] (II) fglrx(0): [uki] DRM interface version 1.0
[    48.892] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:5:0"
[    48.892] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    48.892] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f0353b82000
[    48.892] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    48.893] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    48.893] (II) fglrx(0): swlDriScreenInit done
[    48.893] (II) fglrx(0): Kernel Module Version Information:
[    48.893] (II) fglrx(0):     Name: fglrx
[    48.893] (II) fglrx(0):     Version: 8.81.5
[    48.893] (II) fglrx(0):     Date: Jan  4 2011
[    48.893] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    48.893] (II) fglrx(0): Kernel Module version matches driver.
[    48.893] (II) fglrx(0): Kernel Module Build Time Information:
[    48.893] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.37.6
[    48.893] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[    48.893] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    48.893] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    48.893] (II) fglrx(0): [uki] register handle = 0x00004000
[    48.938] (II) fglrx(0): DRI initialization successfull
[    48.938] (II) fglrx(0): FBADPhys: 0xd2ff7000 FBMappedSize: 0x01004000
[    48.938] (II) fglrx(0): Reserved 0x02500000 bytes of sideport memory for power saving
[    48.970] (==) fglrx(0): Backing store disabled
[    48.970] (II) Loading extension FGLRXEXTENSION
[    48.971] (**) fglrx(0): DPMS enabled
[    48.972] (II) fglrx(0): Initialized in-driver Xinerama extension
[    48.972] (**) fglrx(0): Textured Video is enabled.
[    48.973] (II) LoadModule: "glesx"
[    48.977] (II) Loading /usr/lib64/xorg/modules/glesx.so
[    49.104] (II) Module glesx: vendor="X.Org Foundation"
[    49.104]    compiled for 1.4.99.906, module version = 1.0.0
[    49.104] (II) Loading extension GLESX
[    49.104] (II) fglrx(0): GLESX enableFlags = 528
[    49.106] (II) fglrx(0): GLESX is enabled
[    49.106] (II) LoadModule: "amdxmm"
[    49.120] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[    49.140] (II) Module amdxmm: vendor="X.Org Foundation"
[    49.140]    compiled for 1.4.99.906, module version = 2.0.0
[    49.141] (II) Loading extension AMDXVOPL
[    49.142] (II) Loading extension AMDXVBA
[    49.174] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[    49.184] (II) fglrx(0): Enable composite support successfully
[    49.184] (WW) fglrx(0): Option "VendorName" is not used
[    49.184] (WW) fglrx(0): Option "ModelName" is not used
[    49.184] (II) fglrx(0): X context handle = 0x1
[    49.184] (II) fglrx(0): [DRI] installation complete
[    49.184] (==) fglrx(0): Silken mouse enabled
[    49.186] (==) fglrx(0): Using HW cursor of display infrastructure!
[    49.186] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    49.186] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    49.186] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    49.188] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[    49.188] (II) fglrx(0): Cannot set TV horizontal size.
[    49.188] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[    49.188] (II) fglrx(0): Cannot set TV horizontal position.
[    49.188] (II) fglrx(0): Cannot set TV vertical position.
[    49.751] (--) RandR disabled
[    49.751] (II) Initializing built-in extension Generic Event Extension
[    49.751] (II) Initializing built-in extension SHAPE
[    49.751] (II) Initializing built-in extension MIT-SHM
[    49.751] (II) Initializing built-in extension XInputExtension
[    49.751] (II) Initializing built-in extension XTEST
[    49.751] (II) Initializing built-in extension BIG-REQUESTS
[    49.751] (II) Initializing built-in extension SYNC
[    49.751] (II) Initializing built-in extension XKEYBOARD
[    49.751] (II) Initializing built-in extension XC-MISC
[    49.751] (II) Initializing built-in extension XINERAMA
[    49.751] (II) Initializing built-in extension XFIXES
[    49.751] (II) Initializing built-in extension RENDER
[    49.751] (II) Initializing built-in extension RANDR
[    49.751] (II) Initializing built-in extension COMPOSITE
[    49.751] (II) Initializing built-in extension DAMAGE
[    49.754] ukiDynamicMajor: found major device number 243
[    49.754] ukiDynamicMajor: found major device number 243
[    49.755] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[    49.755] ukiOpenDevice: node name is /dev/ati/card0
[    49.755] ukiOpenDevice: open result is 19, (OK)
[    49.755] ukiOpenByBusid: ukiOpenMinor returns 19
[    49.755] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[    50.778] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    50.919] (II) fglrx(0): Enable the clock gating!
[    50.919] (II) fglrx(0): Setting screen physical size to 338 x 211
[    51.658] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    51.658] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    51.658] (**) Power Button: Applying InputClass "keyboard-all"
[    51.658] (II) LoadModule: "evdev"
[    51.659] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    51.677] (II) Module evdev: vendor="X.Org Foundation"
[    51.677]    compiled for 1.9.3, module version = 2.6.0
[    51.677]    Module class: X.Org XInput Driver
[    51.677]    ABI class: X.Org XInput driver, version 11.0
[    51.677] (**) Power Button: always reports core events
[    51.677] (**) Power Button: Device: "/dev/input/event6"
[    51.682] (--) Power Button: Found keys
[    51.682] (II) Power Button: Configuring as keyboard
[    51.682] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    51.682] (**) Option "xkb_rules" "evdev"
[    51.682] (**) Option "xkb_model" "evdev"
[    51.682] (**) Option "xkb_layout" "us"
[    51.682] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    51.776] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    51.776] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    51.776] (**) Video Bus: Applying InputClass "keyboard-all"
[    51.776] (**) Video Bus: always reports core events
[    51.776] (**) Video Bus: Device: "/dev/input/event13"
[    51.784] (--) Video Bus: Found keys
[    51.784] (II) Video Bus: Configuring as keyboard
[    51.784] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    51.784] (**) Option "xkb_rules" "evdev"
[    51.784] (**) Option "xkb_model" "evdev"
[    51.784] (**) Option "xkb_layout" "us"
[    51.784] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    51.794] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    51.794] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    51.794] (**) Power Button: Applying InputClass "keyboard-all"
[    51.794] (**) Power Button: always reports core events
[    51.794] (**) Power Button: Device: "/dev/input/event3"
[    51.800] (--) Power Button: Found keys
[    51.800] (II) Power Button: Configuring as keyboard
[    51.800] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    51.800] (**) Option "xkb_rules" "evdev"
[    51.800] (**) Option "xkb_model" "evdev"
[    51.800] (**) Option "xkb_layout" "us"
[    51.800] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    51.801] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[    51.801] (II) No input driver/identifier specified (ignoring)
[    51.802] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    51.802] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    51.802] (**) Sleep Button: Applying InputClass "keyboard-all"
[    51.802] (**) Sleep Button: always reports core events
[    51.802] (**) Sleep Button: Device: "/dev/input/event4"
[    51.808] (--) Sleep Button: Found keys
[    51.808] (II) Sleep Button: Configuring as keyboard
[    51.808] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    51.808] (**) Option "xkb_rules" "evdev"
[    51.808] (**) Option "xkb_model" "evdev"
[    51.808] (**) Option "xkb_layout" "us"
[    51.808] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    51.827] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[    51.827] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    51.827] (**) Logitech USB Receiver: always reports core events
[    51.827] (**) Logitech USB Receiver: Device: "/dev/input/event9"
[    51.832] (--) Logitech USB Receiver: Found 20 mouse buttons
[    51.832] (--) Logitech USB Receiver: Found scroll wheel(s)
[    51.832] (--) Logitech USB Receiver: Found relative axes
[    51.832] (--) Logitech USB Receiver: Found x and y relative axes
[    51.832] (II) Logitech USB Receiver: Configuring as mouse
[    51.832] (II) Logitech USB Receiver: Adding scrollwheel support
[    51.832] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    51.832] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    51.832] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[    51.833] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    51.833] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    51.833] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    51.833] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    51.833] (II) Logitech USB Receiver: initialized for relative axes.
[    51.835] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
[    51.835] (II) No input driver/identifier specified (ignoring)
[    51.838] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[    51.838] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    51.838] (**) Logitech USB Receiver: Applying InputClass "keyboard-all"
[    51.838] (**) Logitech USB Receiver: always reports core events
[    51.838] (**) Logitech USB Receiver: Device: "/dev/input/event10"
[    51.846] (--) Logitech USB Receiver: Found 1 mouse buttons
[    51.846] (--) Logitech USB Receiver: Found scroll wheel(s)
[    51.846] (--) Logitech USB Receiver: Found relative axes
[    51.846] (--) Logitech USB Receiver: Found absolute axes
[    51.846] (--) Logitech USB Receiver: Found keys
[    51.846] (II) Logitech USB Receiver: Configuring as mouse
[    51.846] (II) Logitech USB Receiver: Configuring as keyboard
[    51.846] (II) Logitech USB Receiver: Adding scrollwheel support
[    51.846] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    51.846] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    51.846] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[    51.846] (**) Option "xkb_rules" "evdev"
[    51.846] (**) Option "xkb_model" "evdev"
[    51.846] (**) Option "xkb_layout" "us"
[    51.846] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    51.847] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[    51.848] (II) Logitech USB Receiver: initialized for absolute axes.
[    51.863] (II) config/udev: Adding input device CKF7073 (/dev/input/event12)
[    51.864] (**) CKF7073: Applying InputClass "evdev keyboard catchall"
[    51.864] (**) CKF7073: Applying InputClass "keyboard-all"
[    51.864] (**) CKF7073: always reports core events
[    51.864] (**) CKF7073: Device: "/dev/input/event12"
[    51.870] (--) CKF7073: Found keys
[    51.870] (II) CKF7073: Configuring as keyboard
[    51.870] (II) XINPUT: Adding extended input device "CKF7073" (type: KEYBOARD)
[    51.870] (**) Option "xkb_rules" "evdev"
[    51.870] (**) Option "xkb_model" "evdev"
[    51.870] (**) Option "xkb_layout" "us"
[    51.870] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    51.872] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event15)
[    51.872] (II) No input driver/identifier specified (ignoring)
[    51.873] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event16)
[    51.873] (II) No input driver/identifier specified (ignoring)
[    51.877] (II) config/udev: Adding input device Wacom ISDv4 93 Pen (/dev/input/event7)
[    51.877] (**) Wacom ISDv4 93 Pen: Applying InputClass "evdev tablet catchall"
[    51.877] (**) Wacom ISDv4 93 Pen: Applying InputClass "Wacom class"
[    51.877] (II) LoadModule: "wacom"
[    51.880] (II) Loading /usr/lib64/xorg/modules/input/wacom_drv.so
[    51.900] (II) Module wacom: vendor="X.Org Foundation"
[    51.900]    compiled for 1.9.4, module version = 0.10.11
[    51.901]    Module class: X.Org XInput Driver
[    51.901]    ABI class: X.Org XInput driver, version 11.0
[    51.901] (**) Wacom ISDv4 93 Pen: always reports core events
[    51.901] (**) Option "Device" "/dev/input/event7"
[    51.906] (II) Wacom ISDv4 93 Pen: type not specified, assuming 'stylus'.
[    51.906] (II) Wacom ISDv4 93 Pen: other types will be automatically added.
[    51.906] (--) Wacom ISDv4 93 Pen stylus: using pressure threshold of 27 for button 1
[    51.907] (--) Wacom ISDv4 93 Pen stylus: Wacom USB TabletPC tablet maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000  tilt=disabled
[    51.907] (II) Wacom ISDv4 93 Pen stylus: hotplugging dependent devices.
[    51.907] (**) Wacom ISDv4 93 Pen eraser: Applying InputClass "evdev tablet catchall"
[    51.907] (**) Wacom ISDv4 93 Pen eraser: Applying InputClass "Wacom class"
[    51.907] (**) Wacom ISDv4 93 Pen eraser: always reports core events
[    51.907] (**) Option "Device" "/dev/input/event7"
[    51.914] (--) Wacom ISDv4 93 Pen eraser: Wacom USB TabletPC tablet maxX=26312 maxY=16520 maxZ=255 resX=100000 resY=100000  tilt=disabled
[    51.922] (II) XINPUT: Adding extended input device "Wacom ISDv4 93 Pen eraser" (type: ERASER)
[    51.923] (--) Wacom ISDv4 93 Pen eraser: top X=0 top Y=0 bottom X=26312 bottom Y=16520 resol X=100000 resol Y=100000
[    51.946] (II) Wacom ISDv4 93 Pen stylus: hotplugging completed.
[    51.954] (II) XINPUT: Adding extended input device "Wacom ISDv4 93 Pen stylus" (type: STYLUS)
[    51.954] (--) Wacom ISDv4 93 Pen stylus: top X=0 top Y=0 bottom X=26312 bottom Y=16520 resol X=100000 resol Y=100000
[    51.956] (II) config/udev: Adding input device Wacom ISDv4 93 Pen (/dev/input/mouse0)
[    51.957] (II) No input driver/identifier specified (ignoring)
[    51.958] (II) config/udev: Adding input device Wacom ISDv4 93 Finger (/dev/input/event8)
[    51.958] (**) Wacom ISDv4 93 Finger: Applying InputClass "evdev touchscreen catchall"
[    51.959] (**) Wacom ISDv4 93 Finger: Applying InputClass "Wacom class"
[    51.959] (**) Wacom ISDv4 93 Finger: always reports core events
[    51.959] (**) Option "Device" "/dev/input/event8"
[    51.966] (II) Wacom ISDv4 93 Finger: type not specified, assuming 'touch'.
[    51.966] (II) Wacom ISDv4 93 Finger: other types will be automatically added.
[    51.966] (--) Wacom ISDv4 93 Finger touch: using pressure threshold of 27 for button 1
[    51.966] (--) Wacom ISDv4 93 Finger touch: Wacom USB TabletPC tablet maxX=4095 maxY=4095 resX=2 resY=2
[    51.966] (II) Wacom ISDv4 93 Finger touch: hotplugging dependent devices.
[    51.966] (II) Wacom ISDv4 93 Finger touch: hotplugging completed.
[    51.982] (II) XINPUT: Adding extended input device "Wacom ISDv4 93 Finger touch" (type: TOUCH)
[    51.982] (--) Wacom ISDv4 93 Finger touch: top X=0 top Y=0 bottom X=4095 bottom Y=4095 resol X=2 resol Y=2
[    52.007] (II) config/udev: Adding input device Wacom ISDv4 93 Finger (/dev/input/mouse1)
[    52.007] (II) No input driver/identifier specified (ignoring)
[    52.012] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[    52.012] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    52.012] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[    52.012] (**) AT Translated Set 2 keyboard: always reports core events
[    52.012] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[    52.018] (--) AT Translated Set 2 keyboard: Found keys
[    52.018] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    52.018] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    52.018] (**) Option "xkb_rules" "evdev"
[    52.018] (**) Option "xkb_model" "evdev"
[    52.018] (**) Option "xkb_layout" "us"
[    52.018] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    52.020] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[    52.021] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    52.021] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[    52.021] (II) LoadModule: "synaptics"
[    52.026] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    52.027] (II) Module synaptics: vendor="X.Org Foundation"
[    52.027]    compiled for 1.9.4, module version = 1.4.0
[    52.027]    Module class: X.Org XInput Driver
[    52.028]    ABI class: X.Org XInput driver, version 11.0
[    52.028] (**) Option "Device" "/dev/input/event14"
[    52.066] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    52.066] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    52.066] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    52.066] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    52.066] (--) SynPS/2 Synaptics TouchPad: buttons: left right
[    52.066] (**) Option "TapButton1" "1"
[    52.066] (**) Option "TapButton2" "2"
[    52.066] (**) Option "TapButton3" "3"
[    52.098] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    52.098] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    52.114] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    52.114] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    52.114] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    52.114] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    52.114] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    52.114] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    52.114] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    52.114] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    52.138] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    52.139] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse3)
[    52.139] (II) No input driver/identifier specified (ignoring)
[    52.155] (II) config/udev: Adding input device Speakup (/dev/input/event0)
[    52.155] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[    52.155] (**) Speakup: Applying InputClass "keyboard-all"
[    52.155] (**) Speakup: always reports core events
[    52.155] (**) Speakup: Device: "/dev/input/event0"
[    52.162] (--) Speakup: Found keys
[    52.162] (II) Speakup: Configuring as keyboard
[    52.162] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD)
[    52.162] (**) Option "xkb_rules" "evdev"
[    52.162] (**) Option "xkb_model" "evdev"
[    52.162] (**) Option "xkb_layout" "us"
[    52.162] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    52.162] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event11)
[    52.162] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    52.162] (**) HP WMI hotkeys: Applying InputClass "keyboard-all"
[    52.162] (**) HP WMI hotkeys: always reports core events
[    52.162] (**) HP WMI hotkeys: Device: "/dev/input/event11"
[    52.170] (--) HP WMI hotkeys: Found keys
[    52.170] (II) HP WMI hotkeys: Configuring as keyboard
[    52.170] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[    52.170] (**) Option "xkb_rules" "evdev"
[    52.170] (**) Option "xkb_model" "evdev"
[    52.170] (**) Option "xkb_layout" "us"
[    52.170] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    52.179] (II) config/udev: Adding input device ENE eHome Infrared Remote Receiver (/dev/input/event2)
[    52.179] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "evdev keyboard catchall"
[    52.179] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "keyboard-all"
[    52.180] (**) ENE eHome Infrared Remote Receiver: always reports core events
[    52.180] (**) ENE eHome Infrared Remote Receiver: Device: "/dev/input/event2"
[    52.186] (--) ENE eHome Infrared Remote Receiver: Found keys
[    52.186] (II) ENE eHome Infrared Remote Receiver: Configuring as keyboard
[    52.186] (II) XINPUT: Adding extended input device "ENE eHome Infrared Remote Receiver" (type: KEYBOARD)
[    52.186] (**) Option "xkb_rules" "evdev"
[    52.186] (**) Option "xkb_model" "evdev"
[    52.186] (**) Option "xkb_layout" "us"
[    52.186] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    52.232] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments


не нашел как под спойлер спрятать...
доп. сами драйвера насколько я понимаю встали корректно, точнее все подтормаживания 3d в ихсах пропали после устанвки

Автор:  Makap [ 21 июл 2011 15:22 ]
Заголовок сообщения:  Re: непонятный глюк после устанвки драйверов ati

Я вот думаю, а не может конфликтовать модуль fglrx со свободными ati, radeonhd примерно как в этой теме? -> viewtopic.php?f=8&t=629
Посмотрите что покажет lsmod и попробуйте записать в /etc/modprobe.d/blacklist.conf
blacklist radeon
или
blacklist ati
в зависимости от того что выведет lsmod

Автор:  0zxc [ 22 июл 2011 08:24 ]
Заголовок сообщения:  Re: непонятный глюк после устанвки драйверов ati

не помогло к сожалению. так же при блокировке экрана окно ввода пароля не видно..

Страница 1 из 1 Часовой пояс: UTC + 3 часа
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/